Nokia Net Monitor description (DCT3)

MAIN PAGE

< PREVIOUS PAGE NEXT PAGE >

Test 09 – Multislot Power Output

Available in: 6210, 9210

This test displays information about the power output on each of the physical channels used for the uplink.

Test screen	Help screen

mCh: The timeslot number of the physical channel used to carry the DCCH (Dedicated Control Channel) signalling. This is identical to the same parameter in Test 08. If the MS is not in dedicated mode, ‘x’ is displayed.

mPw: The power output used for transmission on the main physical channel. This is identical to the same parameter in Test 08. This is the same value displayed in Test 01. See Test 01 for further information. If the MS is not in dedicated mode, ‘xx’ is displayed.

PwrLv TS x: For the following fields, the value of each field is the power output level used for the corresponding timeslot, in the same format as described in Test 01. If the MS is not in dedicated mode, or the corresponding timeslot is not used in the uplink (see Test 08), ‘xx’ is displayed.

< PREVIOUS PAGE NEXT PAGE >

WAP-gateway IP: 79.186.244.250
Port: 9201